Issue:
how to modify and install bolts xylophone at Jaguar Some vehicles MY 2000 S-Type in the upper area to VI may, under high temperatures, damage sustained to the engine block J-Gate, which the failure of the ignition key when the selector lever is placed in "remove garden leads'. This bulletin provides a procedure to install the clip by e-mail to pivot bolt to increase the lock lever spindle cleaning.
Action:
Check if service action is done by searching vehicles DCS claims. If the service action has not been done, changing the interlock lever all MY 2000 S-TYPE car VIN range above prior to the sale or service on the first oppor tunity. Install the clip-e using the method outlined in this bulletin.
MODIFYING PIVOT BOLT OF INTERLOCK LEVER
- Fully apply the parking brake. Release the snap fastener of the boot on the parking brake lever.
- Lift up the lid of the center console.
- Move the gear shift selector lever to ‘Neutral’.
- Raise the upper console. (Clips may become detached - there is a total of 7 clips).
- Reach under the console to detach the electrical connectors for the Traction Control Switch, Sports/Normal mode switch, cigar lighter and phone connections,where applicable.
Comments
Post a Comment